Test Electronics
Pre-Production Modular Bed of Nails Test Fixure
Adjustable Press Plate on Standard Clamshell Production Test Fixture
Edge Press Technology Tests Multiple Boards in Panelized form
Six Sided Final Assembly Functional Test Fixtures (showing 5 sided version)
Pneumatic Bed of Nails Test Fixure
Electronic Test Equipment Tailor Made for Special Testing needs.
Process Carrier Pallets Wave Solder or IR Reflow -> Wash -> Test.
Used - Reconditioned and Used Test Equipment
All ProductsDivider Tips, Tip Guards Grounding Clips industrial
The HP 10020A Resistive Divider Kit is a signal probing system for measuring fast transition signals in high impedance systems. It is designed for use with 50ohm systems if a 50ohm feedthrough termination is used. The extremely low input RC of the this probe provides high fidelity measurements of fast transition signals. Accessories supplied:
Isolation Tips, Divider Tips Various Grounding Clips and Adapters industrial
The HP 110710A Accessory Probe Kit contains a wide variety of probe types for various broadband sampling RF measurement jobs. Kit contains the following adapters. 11073A Pen-Type Isolator Permits the probe to be clipped on or connected to the point of measurement. 5060-0417 Pincer Jaw Alligator style clip. Permits the probe to be clipped on or connected to the point of measurement. 11061A 10:1 Divider Qty(2) Decreases input sensitivity by a factor of ten (gives 30V full scale). 11072A Isolator Provides DC Isolation. 8710-0084 Nut river Hand tool for probe adjustment. 10220A Microdot Adapter Permits connection of Isolator or 10:1 Divider to Microdot connector. 874-W50B 50 Ohm Termination Terminates signals in a 50ohm system 10219A Type 874A Adapter Permits connection of Isolator or 10:1 Divider to General Radio Co. Type 874 coaxial connector. 10218A BNC Adapter Permits connection of Isolator or 10:1 Divider to female BNC connector. 11063A 50 Ohm Tee Permits monitoring of the signal in a 50ohm system without disturbing the line or attenuating the signal on the line. Kit also contains the following small leads and clips. Ground Lead for pent type isolator (11073-62101), Ground Leads (5060-4991) qty(2), Ground Clips (10213-62102) qty(5), Probe Tips (5020-0457) qty(7), Banana Tip (1251-0013), Spring Tip (5060-04201), Pin Tip (5060-0418), Hook Tip (5060-0419). 
500MHz, 100Kohms <1 pF at 100MHz industrial
The HP 1120A Active Probe is a 500MHz probe for probing high source impedance at high frequencies. This 1:1 active probe provides a probe tip impedance of 100 Kohms shunted by approximately 3 pF at 100MHz. When used with the 10:1 or 100:1 divider tips, the shunt capacitance is <1 pF at 100MHz. 
Powers 4 Probes Individually Regulated industrial
The HP 1122A is a regulated probe power supply that provides all power requirements for simultaneous operation of up to four active probes.
500MHz, 100Kohms 50-ohm output industrial
The HP 1123A Active Probe is a 500MHz probe for probing high source impedance at high frequencies. This 1:1 active probe provides a probe tip impedance of 100 Kohms shunted by approximately 3 pF at 100MHz. When used with the 10:1 or 100:1 divider tips, the shunt capacitance is <1 pF at 100MHz. Kit Includes: 10:1 Divider, Bandwidth Limiter, 100:1 Divider, Slip-on Hook Tip, 2.5" Ground Lead, Spare Probe Tips, Slip-on BNC Probe Adapter, The 50-ohm output provides the optimum impedance match and measurement accuracy for oscilloscopes, spectrum analyzers, counters, and network analyzers with 50-ohm inputs. Power is supplied by instruments with probe power jacks or the 1122A probe power supply. 
Lead Set industrial
92A60-90 General Purpose Lead Set 
900MHz 10MΩ industrial
The P6201 FET Probe is an active FET probe with DC to 900MHz bandwidth and unity gain. The probe features: Low input capacitance. DC offset. AC to DC coupling switch. 0.4 ns risetime. The 1101A Power Supply may be needed if the equipment does not provide probe power. Retractable Probe Tip. 10X Attenuator Head. 100X Attenuator Head. 3 Probe Tips. Miniature Probe Tip Adapter. 12" Ground Lead. Ground Contact. Alligator Clip. Electrical Insulating Sleeve. Ground Contact Insulator. Probe Holder. Hard Plastic Carrying Case. Instruction Sheet.