Prober - Production Clamshell Bed of Nails Testers
Prober
Production volume test fixture with swappable test plates, front and rear panel inlays, and multi-testing compatibility with process carrier pallets. Swappable test plates provide the ability for one fixture base to support a variety of units under test. Interchangeable front and rear panel inserts provide further customization. Interoperability with process carrier pallets provide multiple board testing capabilities, panelized testing, and flex circuit testing. A selection of interfaces to general testing equipment provide for a wide selection of customized testing features.Prober- Production Clamshell
Medium Accessibility
Required if component changes are predicted
Adjustable press plates provide access to the top side of the board for troubleshooting, making adjustments, and visual monitoring. Adjustable press down rods placement is required when you know there are going to be component changes in the future. Prober- Bed of Nails Testers
Insert Based Design
High Durability
Front and rear panel inserts fold in and pull out with the Bed of Nails plate. The press plate quickly removes with a quick change pin. BON, Press, and panel inserts are interchange able.Prober- Pricing Instant Quotation
Quote Tab
Left Side
Test Electronics will precision drill and customize this bed of nails style test fixture for your circuit board. Click on the Quote tab on the left for a quick instant price quotation. Next, click on the Test Equipment tab to design your own embedded test system and get instant pricing. Prober- Other Compatible Products
Quote Tab
Left Side
Next, click on the Reflow Pallets tab and discover what it would cost to test multiple boards right on the fabrication pallet. Or use a desktop or rack mount computer, plug in low cost off the shelf data acquisition boards and create your own functional, in-circuit, or bare board tester.
Not Sure if You Can Build a Fixture Kit?
With the Prober-EZ build kit, all you need is a drill press, a few basic hand tools and two days.
Download the EZ Fixture Kit Instruction Manual Picture Book. The Instruction Manual was written as a highly
illustrated picture book to allow even non-English speaking users to follow the process and build a precision fixture.
Using the methods in this manual it is possible to build a fixture to accuracies comparable to a
CNC milling machine using only a drill press and a few basic hand tools!
Basically the technique is to use a blank board as a drill template.
Since the blank board was drilled with a precision CNC drill, the results of using a
drill press with the blank board as a template will approach the accuracies of a CNC machine.
The resulting fixture will have enough accuracy to probe small 30mil diameter targets spaced as close as 50mil.
Download this 31 page instruction manual and see for yourself.
Prober-06x08 with Adjustable Press Plate Bed of Nails Tester
06x08 inches outside dimensions.
4.874 x 4.4 inches pinning area.
6) Nylon Press downs rods included.
100) Maximum pin count.
2000000) cycles Estimated Life (operations).
Price: $1036.98
Prober-08x15 with Adjustable Press Plate Bed of Nails Tester
08x15 inches outside dimensions.
6.5 x 10.3 inches pinning area.
12) Nylon Press downs rods included.
150) Maximum pin count.
2000000) cycles Estimated Life (operations).
Price: $1449.98
Prober-10x15 with Adjustable Press Plate Bed of Nails Tester
10x15 inches outside dimensions.
8.5 x 10.3 inches pinning area.
15) Nylon Press downs rods included.
200) Maximum pin count.
2000000) cycles Estimated Life (operations).
Price: $1524.98
Prober-12x15 with Adjustable Press Plate Bed of Nails Tester
12x15 inches outside dimensions.
10.5 x 10.3 inches pinning area.
18) Nylon Press downs rods included.
300) Maximum pin count.
2000000) cycles Estimated Life (operations).
Price: $1599.98
Prober-14x15 with Adjustable Press Plate Bed of Nails Tester
14x15 inches outside dimensions.
12.5 x 10.3 inches pinning area.
21) Nylon Press downs rods included.
300) Maximum pin count.
2000000) cycles Estimated Life (operations).
Price: $1674.98
Prober-16x15 with Adjustable Press Plate Bed of Nails Tester
16x15 inches outside dimensions.
14.5 x 10.3 inches pinning area.
24) Nylon Press downs rods included.
300) Maximum pin count.
2000000) cycles Estimated Life (operations).
Price: $1749.98
Prober-18x15 with Adjustable Press Plate Bed of Nails Tester
18x15 inches outside dimensions.
16.5 x 10.3 inches pinning area.
27) Nylon Press downs rods included.
300) Maximum pin count.
2000000) cycles Estimated Life (operations).
Price: $1824.98
Prober-22x15 with Adjustable Press Plate Bed of Nails Tester
22x15 inches outside dimensions.
20.5 x 10.3 inches pinning area.
33) Nylon Press downs rods included.
300) Maximum pin count.
2000000) cycles Estimated Life (operations).
Price: $1974.98
