Test Electronics
Pre-Production Modular Bed of Nails Test Fixure
Adjustable Press Plate on Standard Clamshell Production Test Fixture
Edge Press Technology Tests Multiple Boards in Panelized form
Six Sided Final Assembly Functional Test Fixtures (showing 5 sided version)
Pneumatic Bed of Nails Test Fixure
Electronic Test Equipment Tailor Made for Special Testing needs.
Process Carrier Pallets Wave Solder or IR Reflow -> Wash -> Test.
Used - Reconditioned and Used Test Equipment
All ProductsTwo Output Tubes Composite Video Signal tv
The old standby in hundreds of TV repair shops across the country. It containes a flying spot scanner to generate test patterns on the tv being serviced. The 1076 utilizes two output tubes. One of these tubes drives the CRT deflection coils and flyback for the flying spot scanner, the other is used as a vertical or horizontal plate driver. This allows the user to actually substitute the 1076's drive in place of the drive in a faulty receiver. Other signal and voltage sources include: calibrated -25 to +25 volt bias voltages; -50 to +50 ssync signals; composite video signal; 4.5MHz audio IF carrier; 400Hz audio tone; any IF frequency between 20 and 48MHz; RF outputs to channels 2-8, 12, and 13; AGC keying pulse; HV indicator probe; Boost B+ indicator; and a flyback/yoke tester that will detect shorted turns.
Two Output Tubes Composite Video Signal tv
The old standby in hundreds of TV repair shops across the country. It containes a flying spot scanner to generate test patterns on the tv being serviced. The 1076 utilizes two output tubes. One of these tubes drives the CRT deflection coils and flyback for the flying spot scanner, the other is used as a vertical or horizontal plate driver. This allows the user to actually substitute the 1076's drive in place of the drive in a faulty receiver. Other signal and voltage sources include: calibrated -25 to +25 volt bias voltages; -50 to +50 ssync signals; composite video signal; 4.5MHz audio IF carrier; 400Hz audio tone; any IF frequency between 20 and 48MHz; RF outputs to channels 2-8, 12, and 13; AGC keying pulse; HV indicator probe; Boost B+ indicator; and a flyback/yoke tester that will detect shorted turns.
0 to 50 Volts 0 to 2 Amps industrial
The 1601 Power Supply supplies 0 to 50 Volts at 0 to 2 amps. Meter range switching switches from 50V full scale to 25V full scale for better control at low volatages. Extreemly precise adjustable current control is provided over 4 Full scale ranges of: 0.05A, 0.2A. Seperate power switch and DC output switch is provided. Volatage 0-50VDC Current 0-2A Current Meter 4 ranges Volt Meter 2 ranges Load regulation ±(0.01%) 
Fully Characterize Devices Matching Pairs for Class A/B Amplifiers industrial
The BK 162 Transistor/FET tester has the ability to fully characterize the devises. Large front panel meter gives clear indication of transistor or FET gain and leakage. Variable beta calibration level is provided along with a beta scale for matching transistors and FETs. Matching can be done NPN-NPN or NPN-PNP. Useful for selecting matched pairs for fine tuning class A/B output amplifiers. Likewise, N and P channel FETs can be Gm matched N-N and N-P. Functions Available FET- Gm Matching, Gm, GATE 1, GATE 2, IGSS, IDSS. TRANSISTOR- BETA Matching, BETA, ICBO, ICES, ICEO.