HP 8620C- Sweep Oscillator MainframeSweep 10 msec to 100 sec Output: 0 to 10 V industrial
The 8620C Sweep Oscillator Mainframe, with more than 15 solid-state plug-ins available (sold separately), can provide >10 mW of leveled output power from 3 to 18 GHz. Plug-In sweep bandwidths range from 3 to 350MHz to the wide band 2 to 18 GHz module. With appropriate plug-ins, four separate bands and their respective frequency scales can be selected. Start-Stop sweep points may be set from 1% to 100% of band, up or down scale, at sweep rates from 10 msec to 100 sec per sweep. DeltaF sweeps, at the same rates, from 1% or 10% of band may also be made. CW, continuous wave, makes the sweeper a signal generator, which may be modulated, or allows manual sweeps for frequency calibration. Other sweep modes include automatic, manual, externally triggered, single sweep, and remotely programmed. A marker, selected by the CW/Marker control, may be adjusted to any point on the band, and indicated by either amplitude or intensity. Frequency: 3MHz to 18GHz based on RF Plug-In. Sweep functions: Start-Stop, Delta, CW, Remote Programmed. Sweep modes: auto, line, external. Sweep time: 10 msec to 100 sec. Sweep output: direct coupled, 0 to 10 V. Modulation: Internal AM 1 kHz; External FM based on RF unit. Marker: 1. Option 001 = Programmable Source.Similar Items and Accessories
HP 86209B- RF Plug-in 2.0-18.6 GHz2GHz to 18.6GHz 0 to +13 dBm industrial
The 86209B Sweep Oscillator Plug-In is designed for 8620 Series Sweep Oscillators. Provides CW or Continuous Swept 2GHz to 18.6GHz frequency coverage. Power output is calibrated from 0 to +13 dBm in 1 dB increments with ±0.25 dB flatness and excellent linearity (2MHz) over the entire frequency range.
HP 8620A- Sweep Oscillator MainframeSweep 10 msec to 100 sec Output: 0 to 10 V industrial
The 8620A Sweep Oscillator Mainframe, with more than 15 solid-state plug-ins available (sold separately), can provide >10 mW of leveled output power from 3 to 18 GHz. Plug-In sweep bandwidths range from 3 to 350MHz to the wide band 2 to 18 GHz module. With appropriate plug-ins, four separate bands and their respective frequency scales can be selected. Start-Stop sweep points may be set from 1% to 100% of band, up or down scale, at sweep rates from 10 msec to 100 sec per sweep. DeltaF sweeps, at the same rates, from 1% or 10% of band may also be made. CW, continuous wave, makes the sweeper a signal generator, which may be modulated, or allows manual sweeps for frequency calibration. Other sweep modes include automatic, manual, externally triggered, single sweep, and remotely programmed. A marker, selected by the CW/Marker control, may be adjusted to any point on the band, and indicated by either amplitude or intensity. Frequency: 3MHz to 18GHz based on RF Plug-In. Sweep functions: Start-Stop, Delta, CW, Remote Programmed. Sweep modes: auto, line, external. Sweep time: 10 msec to 100 sec. Sweep output: direct coupled, 0 to 10 V. Modulation: Internal AM 1 kHz; External FM based on RF unit. Marker: 1 Option 001 = Programmable Source.HP 8620C- Sweep Oscillator MainframeSweep 10 msec to 100 sec Output: 0 to 10 V industrial
The 8620C Sweep Oscillator Mainframe, with more than 15 solid-state plug-ins available (sold separately), can provide >10 mW of leveled output power from 3 to 18 GHz. Plug-In sweep bandwidths range from 3 to 350MHz to the wide band 2 to 18 GHz module. With appropriate plug-ins, four separate bands and their respective frequency scales can be selected. Start-Stop sweep points may be set from 1% to 100% of band, up or down scale, at sweep rates from 10 msec to 100 sec per sweep. DeltaF sweeps, at the same rates, from 1% or 10% of band may also be made. CW, continuous wave, makes the sweeper a signal generator, which may be modulated, or allows manual sweeps for frequency calibration. Other sweep modes include automatic, manual, externally triggered, single sweep, and remotely programmed. A marker, selected by the CW/Marker control, may be adjusted to any point on the band, and indicated by either amplitude or intensity. Frequency: 3MHz to 18GHz based on RF Plug-In. Sweep functions: Start-Stop, Delta, CW, Remote Programmed. Sweep modes: auto, line, external. Sweep time: 10 msec to 100 sec. Sweep output: direct coupled, 0 to 10 V. Modulation: Internal AM 1 kHz; External FM based on RF unit. Marker: 1. Option 001 = Programmable Source.HP 86222B- Sweep Oscillator Plug-In10MHz to 2.4GHz 0 to +13 dBm industrial
The 86222B Sweep Oscillator Plug-In is designed for 8620 Series Sweep Oscillators. Provides CW or Continuous Swept 10MHz to 2.4GHz frequency coverage. Power output is calibrated from 0 to +13 dBm in 1 dB increments with ±0.25 dB flatness and excellent linearity (2MHz) over the entire frequency range. Offers a crystal marker system that provides comb markers at 1, 10, or 50MHz. Option 002. 70 dB Step Attenuator (10 dB steps).
