HP 3406A- Broadband Sampling RF Voltmeter10kHz to 1.2GHz Bandwidth -62 dBm to +23 dBm Power Measurements industrial
The HP 3406A Broadband Sampling RF Voltmeter has an extremely wide 10kHz to 1.2GHz bandwidth with high impedance. Signals as small as 50 µV can be resolved on the Voltmeter's linear scale. Full Scale sensitivity from 1 mV to 3 V is selected in eight 10 dB steps and may be read directly from -62 dBm to +23 dBm for power measurements. Expand your measuremt capablities with the 11071A Accessory Probe Kit (sold seperately) Full scale accuracy is within 3% over the greatest part of the band, and within 5 to 13% from 10kHz to 100kHz and 100MHz to 1.2GHz. Maximum input is ±100 V DC, 30 V peak to peak and meter response time is < 3 S. Other features include a DC recorder output, sample hold output for connection to oscilloscopes (>200 Kohms load with < 1000 pF output is 0.316 V full scale), and peak or true RMS voltmeters if other absolute average measurements are required.Similar Items and Accessories
HP 11071A- Accessories Probe Tips for the 3406A RF VoltmeterIsolation Tips, Divider Tips Various Grounding Clips and Adapters industrial
The HP 110710A Accessory Probe Kit contains a wide variety of probe types for various broadband sampling RF measurement jobs. Kit contains the following adapters. 11073A Pen-Type Isolator Permits the probe to be clipped on or connected to the point of measurement. 5060-0417 Pincer Jaw Alligator style clip. Permits the probe to be clipped on or connected to the point of measurement. 11061A 10:1 Divider Qty(2) Decreases input sensitivity by a factor of ten (gives 30V full scale). 11072A Isolator Provides DC Isolation. 8710-0084 Nut river Hand tool for probe adjustment. 10220A Microdot Adapter Permits connection of Isolator or 10:1 Divider to Microdot connector. 874-W50B 50 Ohm Termination Terminates signals in a 50ohm system 10219A Type 874A Adapter Permits connection of Isolator or 10:1 Divider to General Radio Co. Type 874 coaxial connector. 10218A BNC Adapter Permits connection of Isolator or 10:1 Divider to female BNC connector. 11063A 50 Ohm Tee Permits monitoring of the signal in a 50ohm system without disturbing the line or attenuating the signal on the line. Kit also contains the following small leads and clips. Ground Lead for pent type isolator (11073-62101), Ground Leads (5060-4991) qty(2), Ground Clips (10213-62102) qty(5), Probe Tips (5020-0457) qty(7), Banana Tip (1251-0013), Spring Tip (5060-04201), Pin Tip (5060-0418), Hook Tip (5060-0419). 
HP 3406A- Broadband Sampling RF Voltmeter10kHz to 1.2GHz Bandwidth -62 dBm to +23 dBm Power Measurements industrial
The HP 3406A Broadband Sampling RF Voltmeter has an extremely wide 10kHz to 1.2GHz bandwidth with high impedance. Signals as small as 50 µV can be resolved on the Voltmeter's linear scale. Full Scale sensitivity from 1 mV to 3 V is selected in eight 10 dB steps and may be read directly from -62 dBm to +23 dBm for power measurements. Expand your measuremt capablities with the 11071A Accessory Probe Kit (sold seperately) Full scale accuracy is within 3% over the greatest part of the band, and within 5 to 13% from 10kHz to 100kHz and 100MHz to 1.2GHz. Maximum input is ±100 V DC, 30 V peak to peak and meter response time is < 3 S. Other features include a DC recorder output, sample hold output for connection to oscilloscopes (>200 Kohms load with < 1000 pF output is 0.316 V full scale), and peak or true RMS voltmeters if other absolute average measurements are required.
