Test Electronics

Click here to access our
Test Electronics ATE Software.


Enter
Login

Forgot Password?
Recover Password | Forgot your password? Recover it here.
Get Password Return
 
Register
Test Electronics

HVSCM High Voltage Surge Current Monitor

All Test Equipment
High Voltage Surge Current Monitor
PN# 10000SCM
Designed to be used with the Model HVST High Voltage Surge tester. The Surge Current Monitor allows simultaneously surge testing 20 units. The Surge Current Monitor monitors the current going through each unit under test at the time of the surge. If a unit under test breaks down or leaks, the Surge Current Monitor will identify the bad unit by lighting the corresponding LED. The most important features of the surge tester are its ability to test the entire winding insulation system. A high voltage surge generates turn to turn, coil to coil, and phase to phase voltage stress, as well as ground insulation stress. When used as a dielectric test, accurate voltage readings are essential. The HV Surge Tester monitors the voltage directly across the winding under test. In production testing we expect that most of the time the devices will pass. In the event that one should fail, the failed device would be removed and then all the parts would have ot undergo another surge test. Since most devices pass most of the time, simultaneous surge testing can be a real time saver..
Surge Current Monitor Schematic Diagram
Surge Current Monitor Schematic Diagram Click to Enlarge
If a unit under test breaks down or leaks, the Surge Current Monitor will identify the bad unit by lighting the corresponding LED. The most important features of the surge tester are its ability to test the entire winding insulation system. A high voltage surge generates turn to turn, coil to coil, and phase to phase voltage stress, as well as ground insulation stress. When used as a dielectric test, accurate voltage readings are essential. The HV Surge Tester monitors the voltage directly across the winding under test. In production testing we expect that most of the time the devices will pass. In the event that one should fail, the failed device would be removed and then all the parts would have ot undergo another surge test. Since most devices pass most of the time, simultaneous surge testing can be a real time saver..




Top Polycarbonate Shielded Test Surface
The top of the surge current monitor doubles as a safe insulated testing area. This innovative design saves bench space, costly safety equipment, and eliminates those dangerous high voltage test leads. Above all, the short lead lengths eliminate test lead ringing, which minimizing RF noise emission, and false scope triggering. This results in extremely accurate tests.
Easily Upgraded for Various Applications
The Surge Current Monitor's internal circuitry consists of an array of torroidal current transformers. When the current transformer outputs a pulse higher in amplitude than the reference setting on it's associated operational amplifier, the LED lights, showing a failure. This reference value is adjustable to meet the needs of mostly every application.
Safety Features
Safety features protect the eyes and hands making it nearly impossible to touch the High Voltage parts unintentionally.
  • Top of the unit doubles as a safe insulated testing area, saving bench space.
  • Polycarbonate cover protects the operator from flying debris.
  • Tinted cover prevents blinding flashes.
  • Magnetic reed switch safety interlock blocks the surge pulse when the cover is lifted.
Specifications
Tests Per ANSI/IEEE C62.41-1989
Peak pulse voltage 100-10,000 (Volts) Adjustable
Peak breakdown current 1000 (AMPS)
Circulating current 187 (AMPS)
Pulse Energy 5.0 (Joules)
Recharge time 300 (milliseconds)

Designed to be used with these Similar Items and Accessories listed below

HVST-  High Voltage Surge Tester

For surge testing transformers and inductors.    Feedback regulated high frequency switching power supply

The most important features of the surge tester are its ability to test the entire winding insulation system. A high voltage surge generates turn to turn, coil to coil, and phase to phase voltage stress, as well as ground insulation stress. When used as a dielectric test, accurate voltage readings are essential. The HV Surge Tester monitors the voltage directly across the winding under test. This voltage is displayed on an oscilloscope and recorded on the Pass/ Fail LED latch monitor. This voltage will be accurate despite the impedance of the winding being tested. The insulation system can be tested way above the operating voltage because of the brief duration of the applied voltage test pulse. This allows faults to be detected long before they become apparent at operating conditions.
300VAC-  Regulated Variable 0-300VAC Power Supply

For convienient desk top and bench top use    Also available in rack mount

The most important features of the power supply is its ability to hold a constant voltage as the power lines fluxuate and the load fluctuates. Used for testing testing high and low line conditions for any AC powered device.
Content

Thank you for contacting Test Electronics.

Your responses will guide us in developing future products and
providing excellent customer support.

Please rate our service on the following aspects:

Service Excellent Very
good
Good Average Poor Didn't
notice
Products
Product Documentation
Technical Support
Applications Engineering
Website Content

What are your reasons for visiting our site today?

Product information Pricing information
Technical support information Other

What products are you currently in the market for?

What changes or additional products would you suggest?


Content

This is your Personal Notepad

Put notes in here as you browse our website for future reference.

Next Clear
Content

Get and Instant Product Price Quotation.

We hope to beat or meet your cost expectations.

Enter circuit board size:
Select Number of Sides to Probe:
Enter Number of Test Pins for each side:
BOT TOP BAK FNT LFT RGT
Leave unused sides blank

Press Plate Features:
Press Rods Edge Press Adjustable
BON Plate Features:
Standard QuickChange Adjustable
Durability:
50 Thousand 2 Million 10 Million
  50K Operations = 2 years at 100 tests/day 2M Operations = 8 years at 1000 tests/day 10M Operations = 10 years at 4000 tests/day

Additional Features:
Lever Latch Panel Inserts
Microcontroller Mid Carrier Plate
HV Shield RF Shield
Estimate Price and Availability
Estimate Price and Availability
Enter carrier pallet size:
Select Base Material Type:
Pallet Material   Antistatic / Reflectivity:
No Carbon
White
HighCarbon
Black
Med Carbon
Grey
Material Thickness:
3mm 5mm
Hold Down Mechanism:
None SwivelLatch TensionPins
Durability Until Delamination:
12 Thousand 25 Thousand 50 Thousand
  12K Cycles = 6 months at 100 cycles/day 25K Cycles = 1 year at 100 cycles/day 50K Cycles = 2 years at 100 cycles/day

Pallet Material Durability:
Aluminum Stainless Titanium
Material Thickness:
0.0625inch 0.090inch 0.125inch
Hold Down Mechanism:
None SwivelLatch TensionPins

Additional Features:
Anodize Acid Etch
BeadPolish HeatTreat
Pallet Material   Conductivity:
No Carbon
NonConductive
Silicon Carbide
Semiconductive
Material Thickness:
2mm 3mm
Durability from Stress Pulveration Fractures:
1 Million 1.2 Million 2 Million
  1M Cycles Standard HS Machining 1.2M Cycles Bead Polished Finish 2M Cycles Polish & Heat Temper Treatment

Estimate Price and Availability

Submit